1. Manuals
  2. Brands
  3. BodyCraft Manuals
  4. Home Gym
  5. MA605
  6. Assembly instructions manual

BodyCraft MA605 Assembly Instructions Manual

The elite strength training system
Hide thumbs
Table of Contents

Advertisement

Quick Links

THE ELITE STRENGTH TRAINING SYSTEM

ASSEMBLY INSTRUCTION

QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained
technicians will provide immediate assistance to you, free of charge.
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
MA605

Advertisement

Table of Contents
loading

Related Manuals for BodyCraft MA605

Summary of Contents for BodyCraft MA605

  • Page 1: Assembly Instruction

    Please call your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained technicians will provide immediate assistance to you, free of charge.

  • Page 2: Before You Begin

    For your safety and benefit, read this manual and the accompanying literature before using the Bodycraft Elite. Keep this manual for future reference. If you have additional questions, please call your local Bodycraft Elite dealer or our customer service department at 800-990-5556 Monday through Friday, 9 a.m.
  • Page 3 OVERVIEW 151 100 146 161 138 163 113 149 163 158 101 137 112 163...

  • Page 4: Parts List

    PARTS LIST NO. DESCRIPTION QTY. MAIN FRAME REAR STABILIZER FRONT UPRIGHT TOP FRAME FOOT PLATE CONNECTOR GUIDE ROD PRESS ARM RIGHT HANDLE OF PRESS ARM LEFT HANDLE OF PRESS ARM PRESS ARM SUPPORT ROTOR OF PRESS ARM SUPPORT (all pre-assembled) SEAT ADJ.
  • Page 5 PARTS LIST NO. DESCRIPTION QTY. RIGHT SIDE ACRYLIC PANEL LEFT SIDE ACRYLIC PANEL RIGHT TOP PANEL LEFT TOP PANEL PRESS ARM PANEL SELECTOR ROD TOP PLATE WEIGHT PLATE AB CRUNCH ANKLE STRAP SINGLE HANDLE SEAT PAD BACK PAD FOAM PAD FOAM PAD COVER (all pre-assembled) WATER BOTTLE BOTTLE CAGE...
  • Page 6 PARTS LIST NO. DESCRIPTION QTY. STOPPER FOR PRESS ARM HANDLE (all pre-assembled) PLASTIC STUDS 1" T SHAPE END PLUG (all pre-assembled) 608ZB BEARING (all pre-assembled) SPACER FOR MAIN FRAME SPACER FOR CABLE ARM (all pre-assembled) 125 126 127 SEALING RING (all pre-assembled) BEARING BASIN (all pre-assembled) BEARING (all pre-assembled) BEARING COVER (all pre-assembled)
  • Page 7 STEP 1 ASSEMBLE MAIN FRAME TO EASE THE ASSEMBLY PROCESS, DO NOT TIGHTEN ANY BOLTS UNTIL INSTRUCTED. 1. Attach the Rear Stabilizer (2) to the Main Frame (1), using two 1/2" X 5" Hex Bolts (129) and two 1/2" Nylon Nuts (169). 2.
  • Page 8 STEP 2 TOP FRAME AND WEIGHT STACK ASSEMBLY 1. Attach the two Guide Rods (6) to the weight stack plate welded to the Rear Stabilizer (2) using two 3/8" X 3/4" Hex Threaded Bolts (180). 2. Slide one Rubber Cushion (110) onto each Guide Rod (6).

  • Page 9: Cable Arm Assembly

    STEP 3 ASSEMBLE CABLE ARM Remember to keep all BOLTS loose to ensure the holes will align easily. 1. Attach the Cable Arm Assembly (18) to the Main Frame (1), using two 1/2" X 3-1/4" Hex Bolts (130), four 1/2" Smaller Washers (161) and two 1/2" Nylon Nuts (169). 2.
  • Page 10 STEP 4 LEG EXTENSION AND SEAT ASSEMLY 1. Attach the R and L Leg extension Arms (21R & 21L) to the pre-assembled Leg Extension Assembly (20) and secure using a 5/16" X 1/2" Set Screw (157). 2. Slide a Plastic Cap (104) onto each side of the R and L Leg Extension Arm (21R &...
  • Page 11 STEP 4 LEG EXTENSION AND SEAT ASSEMLY...

  • Page 12: Press Arm Axle

    STEP 5 PRESS ARM ASSEMBLY 1. Attach the Press Arm Support (9) to the Top Frame (4) by aligning the holes and inserting the Axle (35). Secure the Axle (35) using two 1/2" Larger Washers (160) and two 1/2" Nylon Nuts (169). Tighten these 1/2" Nylon Nuts (169) and then cap with two 1/2" Cap Nuts (103).

  • Page 13: Back Pad

    STEP 6 SEAT BACK ADJUSTER AND LEG HOLDER ASSEMBLY 1. Attach Seat Back Adjuster (13) to the Front Upright (3), using one 3/8" X 5-1/4" Hex Bolt (133), two 3/8" Washers (163) and one 3/8" Nylon Nut (170). It may be necessary to tighten this bolt, then loosen just enough to let Seat Back Adjuster (13) pivot FREELY.
  • Page 14 STEP 7 INSTALL TOP CABLE TOP CABLE (82) Threaded End Ball End Assemble cables and pulleys simultaneously. 1. Insert the threaded end of Top Cable (82) into slot in the front of Top Frame (4), over T1 and pulley T2 mounted on the Top Frame (4), using one 3/8" X 109.5L Flat Pin Bolt (140) and M6 X 12L Male Screw (147) each.
  • Page 15 STEP 7 INSTALL TOP CABLE T1,T2 STEP 2-1 T3,T4,T5 T6,T7 STEP 2-2 T8,T10 T9,T11...

  • Page 16: Ab Crunch Cable

    STEP 8 AB CRUNCH CABLE INSTALLMENT AB CRUNCH CABLE (83) REMOVABLE END (83A) Threaded End Removable end of AB crunch cable should be screwed on completely after the AB Crunch Cable installment. 1. Screw the threaded end of the AB Crunch Cable (83) into the threaded receptor welded to Top Frame (4) as shown in Fig.
  • Page 17 STEP 9 INSTALL LEG EXTENSION CABLE Threaded End Steel Ball End LEG EXTENSION CABLE (84) 1. Hook the steel ball end of the Leg Extension Cable (84) into the groove in the Leg Curl Cam (22) as shown in Fig. E1. and then route the cable in between two pulleys (E2 and E3) mounted using one 3/8"...
  • Page 18 STEP 10 INSTALL CONNECT CABLE CONNECT CABLE (85) Threaded End Threaded End 1. Screw the threaded end of Connect Cable (85) into the Single Pulley Block (24) and route the cable up and over pulley C2 mounted on Top Frame (4), using one 3/8" X 55L Flat Pin Bolt (142) and M6 X 12L Male Screw (147) as shown in Figs.
  • Page 19 STEP 11 INSTALL CABLE ARM CABLE CABLE ARM CABLE (86) Ball End Ball End 1. The Cable Arm Cable (86) is already run through the Cable Arm (16). Mount pulleys P3 and P7 along with their Pulley Guide Bracket (27) to the Cable Arm Assembly (18) as shown, using one 3/8" X 1-3/4"...

  • Page 20: Clip

    STEP 12 INSTALL LOW CABLE LOW CABLE (87) Ball End Steel Ball End Do not use the Low Cable if you have purchased the optional Leg Press attachment. Instead, use the Leg Press Cable (213) and related instructions found in the Leg Press box.

  • Page 21: Cap Nut

    STEP 13 WEIGHT STACK SHROUDS & ACRYLIC PANELS ASSEMBLY IS COMPLETE ! Tighten all bolts gradually from bottom of Main Frame (1). When attaching the Acrylic Panels, be careful not to over tighten the screws. Cracked Panels due to over tightening are not covered under warranty. 1.
  • Page 22 STEP 13 WEIGHT STACK SHROUD & ACRYLIC PANEL...

  • Page 23: Step 14 Attach Accessories

    STEP 14 ATTACH ACCESSORIES 1. Attach Water Bottle (67) to the Bottle Cage (68) and the Lat Bar (42) with Clip (91) to Top Cable (82) and rest on Lat Bar Holder. 2. Attach AB Crunch (60) with Clip (91) to the AB Crunch Cable (60) and Single Handle (62) to Cable Arm (16).
  • Page 24 The Cable Adjustment of ELITE GYM a. The Cables should be tightened to the point just before the Top Plate lifts off the stack. In other words, if the Top Plate is not resting on the stack, you will need to add length, or, if there is slack in the cables, you will need to shorten the cables.
  • Page 25 Guide Rods (6). Enjoy many years of a Fit Lifestyle. Thank you for purchasing the BodyCraft Elite Strength Training System. If you have any questions, please call your local BodyCraft dealer, call our customer service department at 800-990-5556 or at http://www.bodycraft.com.

Table of Contents