Page 1
RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate assistance to you, free of charge. We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is guranteed for as long as you own it. We will repair or replace anything that goes wrong.
DESCRIPTION CONNECT TUBE MAIN FRAME FRONT STABILIZER LEG PRESS SUPPORT SLIDING TUBE FOOT REST HANDLE BAR AXLE DESCRIPTION RECT 45 X 75 END PLUG 50 SQ SPACER 50 END PLUG 45 END PLUG RECT 1" X 2" END PLUG 3/4" BUSHING 3/8"...
Page 4
ASSEMBLE LEG PRESS STATION Remove the 50 MM END PLUG(32) from BASE FRAME(1). Remove PEC DEC SEAT PAD(54) from PEC DEC SEAT(19). Attach CONNECT TUBE(201) to BASE FRAME(1) using three 3/8" X 1/2" HEX HEAD BOLT(236) and three 3/8" WASHER(239). Attach MAIN FRAME(202) to CONNECT TUBE(201) using two 1/2"...
Page 5
INSTALL LEG PRESS CABLE If previously installed, completely remove AB CABLE(94a) by unscrewing HEX HEAD BOLT(80) as shown(fig uA7). Assemble LEG PRESS CABLE(223)(from leg press box) and pulleys simultaneously. Insert eyelet end of LEG PRESS CABLE(223) into slot in front of PRESS UPRIGHT(3), over pulley A1, A2, down and around pulley A3, up and around A4, down and around pulley A5, up and around A6, under pulley A7, under and around pulley A8, down and around A9, down and around A10, down and around A11.
Page 6
Guide Rods(5). Enjoy many years of a Fit Lifestyle. Thank you for purchasing the Bodycraft Galena Home Gym. If You have any questions, please call your local BodyCraft dealer or call our customer service department at 800-990-5556.
Need help?
Do you have a question about the GALENA STRENGTH and is the answer not in the manual?
Questions and answers