Please call your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained technicians will provide immediate assistance to you, free of charge.
6. Make certain all cables are seated within the pulleys before every use. 7. Exercise with care to avoid injury. 8. If unsure about the proper use of the Bodycraft Elite Leg Press attachment strength training system call your local Bodycraft dealer or...
PARTS LIST NO. DESCRIPTION QTY. BASE FRAME CONNECTING REAR STABILIZER LEG PRESS SUPPORT FOOT PLATE BACK PAD ADJUSTER SEAT HANDLE SLIDING PULLEY BLOCK 1" AXLE (LONGER) 1" AXLE (SHORTER) RING SPACER 114mm PULLEY 90mm PULLEY 213A LEG PRESS CABLE 213B LEG PRESS LOW CABLE BACK PAD SEAT PAD...
Page 5
STEP 1 ASSEMBLE CONNECTING REAR STABILIZER To ease assembly, Do Not tighten any bolts until instructed. 1. Slide the Sliding Pulley Block (207) onto the Guide Rod (243). Orient the guide rod so that the pulley bracket is facing toward the machine, threaded receptor facing away from machine, then insert the Guide Rod (243) into the Connecting Rear Stabilizer (202) and secure using two 5/16"...
Page 6
STEP 2 ASSEMBLE BASE FRAME 1.Attach the Base Frame (201) to the Connecting Rear Stabilizer (202) using two 1/2" X 5" Hex Bolts (223) and two 1/2" Washers (235). 2. Insert the 1" Axle (shorter) (209) into the Leg Press Support (203) at the underside of the bend, and a Ring Spacer (210) on each end of the axle.
Page 7
STEP 3 INSTALL LEG PRESS CABLE Threaded End Leg Press Cable (213A) Eyelet End Assemble cables and pulleys simultaneously. 1. Screw the threaded end of the Leg Press Cable (213A) into the threaded receptor on the Sliding Pulley Block (207), as shown in Fig.
Page 8
STEP 4 INSTALL LEG PRESS LOW CABLE Leg Press Low Cable (213B) Threaded End Ball End Assemble cables and pulleys simultaneously. W1,W2,W3 1. Screw the threaded end of the Leg Press Low Cable (213B) into the threaded receptor welded to the vertical tube on the Connecting Rear Stabilizer (202).
Page 9
6. Enjoy many years of a Fit Lifestyle. Thank you for purchasing the Bodycraft Elite Leg Press attachment. If You have any questions, please call your local BodyCraft dealer or call our customer service department at 800-990-5556...