Please call your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained technicians will provide immediate assistance to you, free of charge.
7. Make certain all cables are seated within the pulleys before every use. 8. Exercise with care to avoid injury. 9. If unsure about the proper use of the LEG PRESS OF K2 GYM strength training system call your local dealer or our customer...
PARTS CHART DESCRIPTION QTY. BASE STABILIZER LEG PRESS MAIN FRAME LEFT LEG PRESS HANDLE RIGHT LEG PRESS HANDLE LONG LEG PRESS CONNECTOR (1007mm) FRONT LEG PRESS SUPPORT WEIGHT BASE CONNECTOR (779mm) REAR LEG PRESS SUPPORT FOOT PLATE CONNECTOR FOOT PLATE BACK PAD ADJUSTER BEARING HOUSING(all pre-assembled) LEG PRESS AXLE...
Page 5
STEP 1 1. Attach the Long Leg Press Connector (205) to the Base Frame (1) of K2 gym, using two 3/8" X 3-1/8" Hex Bolts (230), four 3/8" Washers (238) and two 3/8" Nuts (241). Attach the Weight Base Connector (207) to the Gym Weight Base (18) of K2 gym, using two 3/8"...
Page 6
STEP 2 1. Attach the Leg Press Main Frame (202) to the Weight Base Connector (207) and the Long Leg Press Connector (205) using four 3/8" X 4" Hex Bolts (229), eight 3/8" Washers (238) and four 3/8" Nuts (241). 2.
Page 8
STEP 3 bolt end metal ball end LEG PRESS CABLE (243) 1. Screw the threaded end (approximately half way) of the Leg Press Cable (243) into the Single Pulley Block (27) as shown in Fig. 1. 2. Route the cable up and over the right side pulley in the Top Frame (5) as shown in Fig.
Page 10
5.For better performance, apply a household lubricant (such as silicone) to any adjustable areas. 6.Enjoy many years of a Fit Lifestyle. Thank you for purchasing the LEG PRESS OF K2 GYM. If You have any questions, please call your local BodyCraft dealer or call our customer service department at 800-990-5556...