Switching Between Playback Screens - JVC VR-509E Instructions Manual

Switching between Playback Screens

The VR-509 is equipped with features to playback images on
single screens and split screens.
* Sequential display is not possible during playback.
CH1 CH2
Single Screen
CH3 CH4
[SPLIT]
CH1-9
[SPLIT]
CH1
-
[1] [9]
CH4
Single Screen
• The SPLIT display LED and the SEQUENCE display LED
are both extinguished.
CAMERA 1
Press buttons [1] to [9] to switch to the required camera
input.
Press the [SPLIT] button to divide the screen into 9 split
screens.
SPLIT Screen
• The SPLIT display LED will be illuminated, and the
SEQUENCE display LED will be extinguished.
1. Press [1] to display the 4 DIV PATTERN A screen.
CAM 1 CAM 2
CAM 3 CAM 4
2. Press [2] to display the 4 DIV PATTERN B screen.
CAM 5 CAM 6
CAM 7 CAM 8
3. Press [3] to display the 4 DIV PATTERN C screen.
CAM 9
4 DIVISION SCREEN
[1]
[2] [3]
CH5 CH6 CH9
CH7 CH8
[4] [5]
SPLIT SCREEN
CH2 CH1 CH2 CH3
CH3 CH4 CH5 CH6
CH5 CH6 CH7 CH8 CH9
Playing Back Recorded Images
4. Press [5] to display the 9 DIV PATTERN screen.
CAM 1 CAM 2
CAM 4 CAM 5
CAM 7 CAM 8
* The screen layout for the split screens are set on the "LIVE
PICTURE" screen. (Page 23)
* The position the border will differ slightly with live images and
playback images.
* The six-screen display cannot be activated even if the [4]
button is pressed when the split-screen mode is in use. The
nine-screen display will be activated in this case.
Press the [SPLIT] button to display the single screen.
CAM 3
CAM 6
CAM 9
41