Installation Settings - JVC VR-509E Instructions Manual

Installation and Preparation

Installation Settings

1. Press the [MENU] button.
INTRODUCTION SET
DETAIL REC
DETAIL OPERATION
LIVE PICTURE
Button operation explanation
SET UP
CURSOR
UPDATE/NEXT
BACK
• Opens the menus in accordance with the instructions
provided in MENU Screen Operations (page 17) in the
sequence of "MENU" → "INTRODUCTION SET".
• The "INTRODUCTION SET - 1" screen will be displayed.
* The settings cannot be amended during recording.
INTRDUCTION SET-1
CAM 1
CAM 2
CAM 3
CAM 4
CAM 5
CAM 6
The current setting is changed when preserving it.
CAM 7
CONTINUE ABORT
CAM 8
CAM 9
PRIORITY
2. Select [Continue] on the confirmation screen with the
use of the [ / ] keys, and then press the [SET] button.
• The confirmation screen will close.
* Select [ABORT] and press the [SET] button to return to
the top menu.
INTRODUCTION SET - 1
3. Select your desired item with [ / ], and then press
[–/+] to change the value settings.
Settings
CAMERA1 to 9
CONNECT, DISCONNECT:
Sets the camera input that is to be used for
recording at "CONNECT", and all other cameras
at "DISCONNECT".
PRIORITY
SMOOTH: Sets and records with a total recorded frame
count of 100 images per second, and a picture
size of 352 x 288 pixels.
HIGH-QUALITY:
Sets and records with a total recorded frame
count of 50 images per second, and a picture
size of 720 x 288 pixels.
20
FUNCTION : USER GUIDANCE
CONNECT
CONNECT
CONNECT
CONNECT 3.
CONNECT
CONNECT
Confirmation
CONNECT
CONNECT
screen
CONNECT
SMOOTH
2.
CAUTION
When the setting has been made for a specific number of
cameras, it is only possible to amend [INTRODUCTION
SET-1]. In order to amend the subsequent cameras, the
[OPERATION SET] data (the F, RATE, QLY, and M.DET
settings for NORMAL/REC/ALARM REC) that use
[STANDARD] or [REC PATTERN 1 to 9] must be reset.
(See "Setting the Operation Set" on page 31)
4. Press the [SET] button.
• The "INTRODUCTION SET - 2" screen will be displayed.
INTRODUCTION SET-2
DURATION
5 DAYS
AUDIO REC
REPEAT REC
INTRODUCTION SET - 2
5. Select your desired item with [ / ], and then press
[–/+] to change the value settings.
Settings
DURATION
1DAY, 3DAY, 5DAY, 1WEEK, 2WEEK, 3WEEK, 1MONTH,
2MONTH, 3MONTH:
Sets the period for which the recorded images are to
be stored on the hard disc based on the preset
recorded image mode and the number of cameras
connected.
* This storage period only acts as a yardstick, as the actual
period of storing images may differ depending on
amendments to the frame rate, resolution and other settings
in [INTRODUCTION SET-3] (refer to the section on recording
time on page 110 for further details on the storage period for
recorded images.)
AUDIO REC
ON, OFF: Sets whether to record sound audio when in the
NORMAL REC and ALARM REC modes.
REPEAT REC
Sets the action when the remaining capacity in the hard disk
becomes empty.
OFF: Stops recording.
ALARM LOCK: Continues recording over old recordings.
However, recordings made in the ALARM REC
mode will not be overwritten.
ALL: Continues recording over old recordings.
5.
ON
ALL