Table of Contents
Advertisement
3. Details of the Commands (continued)
3.4. SENS Commands (continued)
•
ALARM MODE SENSE (D9H) [JVC-1]
Returns the status data for the alarm recording settings.
(Current operating mode status. The status at the time of
operations will be returned when in the timer mode.)
TXD
D9H
RXD
1st byte
2nd byte 3rd byte
ALARM MODE SENSE Return Data
byte No.
bit No.
Alarm Recording Settings (All)
Recording time during passcode input errors:
bit 7
00: NotRec, 01: 10 seconds, 10: 20 seconds, 11: 30 seconds
bit 6
bit 5
Recording time during emergency detection:
000: NotRec, 001: 30 seconds, 010: 1 minute, 011: 5 minutes,
bit 4
1
bit 3
100: 10 minutes, 101: 20 minutes, 110: Continual, 111: Manual
bit 2
"1" output with audio recording during alarm operations at [ON].
"1" output with audio recording at [ON].
bit 1
bit 0
Recorded image mode: Smooth: "0", High-resolution: "1"
Alarm Recording Settings 1/2 (Camera 1)
bit 7 Not defined: "0" output
bit 6
Alarm recording: Recording frame rate:
bit 5
0011: 0.8 0100: 1.7 0101: 2.5 0110: 5 0111: 8.3
2
bit 4
1000: 12.5 1001: 25 1110: Auto 1111: NotRec
bit 3
bit 2
Recording resolution: 00 : L 01 : B 10 : N 11 : H
bit 1
bit 0 Not defined: "0" output
Alarm Recording Settings 2/2 (Cameras 2 to 9)
bit 7 Not defined: "0" output
bit 6
Not defined: "0" output
bit 5
Recording time:
3
000 : 10 001 : 15 010 : 30 011 : 60 100 : 180 101 : 300
bit 4
bit 3
110: Manual
bit 2
Pre-sensor recording time:
00: 10, 01: 30, 10: 60 (seconds), 11: [OFF]
bit 1
bit 0 "1" output with pre-alarm recording at [ON].
Alarm Recording Settings 1/2 (Cameras 2 to 9)
4/6/,,
bit 7
The contents are the same as 2BYTE.
to 0
,/18
Alarm Recording Settings 2/2 (Cameras 2 to 9)
bit 7
5/7/,,
The contents are the same as 3BYTE.
to 0
,/19
•
VR MODE SENSE (DAH) [JVC-1]
Returns the status data for the operation settings.
TXD
RXD
19th byte
byte No.
1
2
3
4
5
6
DAH
1st byte
2nd byte 3rd byte
VR MODE SENSE Return Data
bit No.
Not defined: "0" output
bit 7
bit 6
Continuous skip playback:
00: OFF, 01: 1 second, 10: 5 seconds, 11: 10 seconds
bit 5
bit 4
Time jump settings:
000: 1minute, 001: 5 minutes, 010: 10 minutes, 011: 30 minutes,
bit 3
100: 1 hour, 101: 4 hours, 110: 1 day, 111: 1 week
bit 2
bit 1
Skip button settings:
00: Time, 01: Alarm, 19: Event, 11: Motion detection
bit 0
Operation Settings 1/5
Loop recording:
bit 7
00: OFF, 01: Alarm lock, 10: All
bit 6
"1" output with the operation lock release method at [Passcode].
bit 5
bit 4
Range of operation lock activation:
00: OFF, 01: Prohibit stop recording, 10: Prohibit all, 11: User settings
bit 3
bit 2
"1" output with recording display lamp at [ON].
bit 1
Power failure restoration operations:
00: OFF, 01: Maintained prior to power failure, 10: Enforced recording
bit 0
Operation Settings 2/5
bit 7
Not defined: "0" output
bit 6
Not defined: "0" output
bit 5
Recorded image storage period:
bit 4
0000: 1 day, 0001: 3 days, 0010: 5 days, 0011: 1 week,
bit 3
0100: 2 weeks, 0101: 3 weeks, 0110, 1 month, 0111: 3 months,
bit 2
1000: 6 months
bit 1
Loop recording:
00: OFF, 01: Alarm lock, 10: All
bit 0
Operation Settings 3/5
bit 7
Not defined: "0" output
bit 6
Not defined: "0" output
bit 5
"1" output with DVD operations at [ON].
bit 4
"1" output with normal mode at [ON].
bit 3
"1" output with monitor switch at [ON].
bit 2
"1" output with amend settings at [ON].
bit 1
"1" output with playback at [ON].
bit 0
"1" output with stop recording at [ON].
Operation Settings 4/5
bit 7
Audio 2 link destination:
bit 6
0000: No specification, 0001: Camera 1; 0010: Camera 2;
bit 5
0011: Camera 3; 0100: Camera 4; 0101: Camera 5; 0110: Camera 6;
0111: Camera 7; 1000: Camera 8; 1001: Camera 9
bit 4
bit 3
Audio 1 link destination:
bit 2
0000: No specification, 0001: Camera 1; 0010: Camera 2;
bit 1
0011: Camera 3; 0100: Camera 4; 0101: Camera 5; 0110: Camera 6;
bit 0
0111: Camera 7; 1000: Camera 8; 1001: Camera 9
Operation Settings 5/5
bit 7
Not defined: "0" output
bit 6
Not defined: "0" output
bit 5
Not defined: "0" output
bit 4
Not defined: "0" output
bit 3
"1" output with mirroring operation at [ON].
bit 2
"1" output with auto scandisk at [ON].
bit 1
When no selection of audio output link specification:
bit 0
00: OFF, 01: Audio 1, 10: Audio 2
RS-232C Interface
6th byte
Skip Settings
121
Advertisement
Table of Contents
Troubleshooting
