JVC VR-509E Instructions Manual page 98

Explanations
Troubleshooting (continued)
Problems with the DVD
If the following messages are displayed during DVD exporting or DVD playback, press the [CANCEL] button to delete the message,
and then check the cause of the problem.
Onscreen Display
"DVD export data retrieval was
discontinued (D-01)"
"DVD export data retrieval was
discontinued (D-02)"
"DVD export data retrieval was
discontinued (D-03)"
"DVD export data conversion
was discontinued (D-01)"
"DVD export data conversion
was discontinued (D-02)"
"DVD export data conversion
was discontinued (D-03)"
"DVD export data disk making
was discontinued (D-01)"
"DVD export data disk making
was discontinued (D-02)"
"DVD export data disk making
was discontinued (D-03)"
"There is no file can be
reproduced in DVD (D-01)"
"There is no file can be
reproduced in DVD (D-02)"
"There is no file can be
reproduced in DVD (D-03)"
Problems with Flash Memories
Onscreen Display
"STILL PICTURE FAILED"
"DOWN DATA FAILED"
"UP DATA FAILED"
98
• No relevant retrieval data.
• The result of the search exceeds the disk capacity.
• Search processing error.
• No relevant conversion data.
• The result of the conversion exceeds the disk capacity.
• Conversion processing error.
• Disk creation failed.
→ There is a chance that an error occurred on the relevant disk.
• The inserted disk is not supported.
• Disk deletion failed.
→ There is a chance that an error occurred on the relevant disk.
• The directory for list creation does not exist.
• The file for list creation does not exist.
• List creation failed.
• The flash memory was disconnected during writing operations.
• The flash memory is set for read-only operations.
→ Disable the read-only function.
• The flash memory does not have sufficient capacity.
→ Increase the available capacity, or connect a new flash memory.
• Sufficient capacity is available, but writing is not possible. (There are
limits to the number of files a USB flash memory can store in the root
directory.)
→ Either store the new file in a sub-directory, or delete some of the other
files.
• The flash memory was disconnected during reading operations.
• No menu setting data exists on the flash memory.
• The VR-509 version does not match up with the menu setting data
version.
• The menu setting data file is damaged.
Cause and Recovery
Cause and Recovery
Refer
to
Page
P57
P57
P57
P60
Refer
to
Page
P62
P63
P63