JVC VR-509E Instructions Manual page 118

RS-232C Interface
3. Details of the Commands (continued)
3.3. Setup Commands
• DOWN (63H) [JVC-1]
• RIGHT (64H) [JVC-1]
• LEFT (68H) [JVC-1]
• UP (69H) [JVC-1]
Shifts the parameter settings when the timer PRG and the
alarm search parameters have been set.
Shifts the selection fields with the [UP] and [DOWN] keys
when the menu is being displayed.
• Vol +, – (65H, 66H) [JVC-1]
Changes the set values with + (ascending) and –
(descending).
• SEQ (6AH) [JVC-1]
Changes the monitor output screen mode.
• MENU ON (6BH) [JVC-1]
Displays the menu.
• MENU OFF (6CH) [JVC-1]
Clears the menu.
• MENU ON/OFF (6CH) [JVC-1]
Switches between menu displays/clear.
• ON SCREEN SELECT (74H) [JVC-1]
1st byte 2nd byte
TXD
74H
RXD
0AH
Switches the contents displayed on screen (REMAIN
display is not performed when loop recording is set at ON.)
Bit Status
7 1 / 0 Stop recording notification : 1( ON ) / 0( OFF )
6 1 / 0 Warning display
5 1 / 0 Camera title display
4 1 / 0 Mode display
3 1 / 0 Remaining capacity display : 1( ON ) / 0( OFF )
2 1 / 0 Alarm detection display
1 1 / 0 Alarm count display
0 1 / 0 Date/time display
• CANCEL (76H) [JVC-1]
Cancels the program data on the program timer setup
screen.
• HDR PB CAMERA SET (86H) [JVC-1]
Specifies the playback camera. The monitor output camera
is specified during recording.
1st byte 2nd byte
TXD
86H
RXD
0AH
118
0AH
Second byte
Detail
: 1( ON ) / 0( OFF )
: 1( ON ) / 0( OFF )
: 1( ON ) / 0( OFF )
: 1( ON ) / 0( OFF )
: 1( ON ) / 0( OFF )
: 1( ON ) / 0( OFF )
3rd byte
0AH 0AH
Second byte
Bit Status
7 to 4 Fixed at "3"
0 / 1 / 2 0: FULL size specification / 1: FULL size sequential display
2: 4-screen specification / 3: 4-screen sequential display
3 to 0 3 / 4 / 5
5: 6-screen specification / 6: 9-screen specification
6
* FULL size sequential display, 4-screen sequential
display and 6-screen specification are invalidated when
in the playback mode (include when recording and
playback are performed at the same time.)
The FULL size sequential display ⇔ 4-screen
*
sequential display specifications are invalid.
Third byte
Bit Status
7 to 4 Fixed at "3"
Second BYTEF: During FULL size specification
8: Camera 9 specification to 0: Camera 1 specification
Second BYTEF: During 4-screen specification
2: Pattern C
3 to 0 8 to 0
1: Pattern B
0: Pattern A
Values that do not correspond to each setting are
invalidated.
* Invalid with Second Byte: FULL size sequential display,
4-screen sequential display, 6-screen screen and 9-
screen specifications.
• DATE SET(8EH) [BASIC/JVC-1]
Sets the month, day and year in the VR-509E.
(Cannot be set when the NTP Client function is enabled, or
when the VR-509E is in the recording mode.)
Month
TXD
8EH
RXD
0AH
0AH 0AH
• TIME SET(8FH) [BASIC/JVC-1]
Sets the hours, minutes and seconds in the VR-509E.
(Cannot be set when the NTP Client function is enabled, or
when the VR-509E is in the recording mode.)
Hours
TXD
8FH
RXD
0AH
0AH 0AH
• MENU RESET (EFH) [JVC-1]
Initializes the menu setup values.
(Cannot be set when the VR-509E is in the recording
mode, or when the operation lock has been activated.)
Detail
Detail
Day Year
0AH 0AH 0AH 0AH
Minutes Seconds
0AH 0AH 0AH 0AH