Switching Between Playback Screens - JVC VR-509E Instructions Manual

Switching between Playback Screens

The VR-509 is equipped with features to playback images on
single screens and split screens.
* Sequential display is not possible during playback.
CH1 CH2
Single Screen
CH3 CH4
[SPLIT]
CH1-9
[SPLIT]
CH1
-
[1] [9]
CH4
Single Screen
• The SPLIT indicator and the SEQUENCE indicator are
both extinguished.
CH 1
Press buttons [1] to [9] to switch to the required camera
input.
Press the [SPLIT] button to display the SPLIT screen
(the SPLIT screen that was previously set will be
displayed.)
SPLIT Screen
• The SPLIT indicator will be illuminated, and the
SEQUENCE indicator will be extinguished.
1. Press [1] to display the "QUAD-A" screen.
CH 1 CH 2
CH 3 CH 4
2. Press [2] to display the "QUAD-B" screen.
CH 5 CH 6
CH 7 CH 8
3. Press [3] to display the "QUAD-C" screen.
CH 9
QUAD SCREEN
[1]
[2] [3]
CH5 CH6 CH9
CH7 CH8
[4] [5]
SPLIT SCREEN
CH2 CH1 CH2 CH3
CH3 CH4 CH5 CH6
CH5 CH6 CH7 CH8 CH9
Playing Back Recorded Images
4. Press [5] to display the "9 WAY" screen.
CH 1 CH 2
CH 4 CH 5
CH 7 CH 8
* The screen layout for the split screens are set on the "LIVE
PICTURE" screen. (Page 23)
* The position of the border will differ slightly with live images
and playback images.
* The "6 WAY" cannot be activated even if the [4] button is
pressed when the split-screen mode is in use. The "9 WAY"
screen will be activated in this case.
Press the [SPLIT] button to display the single screen.
CH 3
CH 6
CH 9
41