Pass Code Setup; Displaying The Power Outage Time List And Log - JVC VR-509E Instructions Manual

Useful Features Using a PC

Pass Code Setup

1. Press the [MENU] button.
• The [MENU] → [DETAIL OPERATION] →
[MAINTENANCE] → [PASSCODE SET] screens will be
displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
PASSCODE SET
PASSCODE
MIS-INPUT OF PASSCODE
2. Select [PASSCODE] with the [ / ] keys, and then
press [SET].
• The pass code confirmation/amendment screen will be
displayed.
Please input the PassCode.
****
Press the SET Key.
Settings
PASSCODE
NONE: Displayed when no pass code has been set.
SET: Displayed when a pass code has been set.
3. Enter the pass code with the use of the ten-key pad,
and then press [SET].
• The pass code will be set or amended.
* Enter the four characters of the passcode.
4. Select [MIS-INPUT OF PASSCODE] with the [ / ]
keys, and then amend the value of the setting with
[–/+].
Settings
MIS-INPUT OF PASSCODE
OFF: A warning will not be issued even when mis-input
occurs.
ONCE, TWICE, THREE TIMES:
A warning is issued after mis-input occurs
(consecutively) for the number of times set.
5. Press the [SET] button.
• The confirmation screen will be displayed.
6. Select [SAVE] with the [ / ] keys, and then press
[SET].
54
2.
NONE
THREE TIME
4.
3.
Displaying the Power Outage Time List
and Log
1. Press the [MENU] button.
• The [MENU] → [DETAIL OPERATION] →
[MAINTENANCE] → [MAINTENANCE/LOG] screens will
be displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
• The TOTAL TIME and POWER OUTAGE TIME LIST will
be displayed.
• The oldest log and the most recent three logs will be
displayed for the POWER OUTAGE TIME LIST.
MAINTENANCE/LOG
TOTAL TIME ********** h
POWER OUTAGE TIME LIST
PL - **** **/**/**
PL - **** **/**/**
PL - **** **/**/**
PL - **** **/**/**
REBOOT
OPERATION LOG
RECORD LOG
DOWNLOAD
UPLOAD
Deleting the Power Outage List
2. Select the desired list with the [ / ] keys, and then
press [CANCEL].
• The selected list will be deleted.
Displaying the Operation Log and Recording
Log
3. Select your desired item with the [ / ] keys, and then
press [SET].
Settings
OPERATION LOG
Displays the operation log.
RECORD LOG
Displays the recording log.
CAUTION
There are cases where images recorded close to the times
of power failures will not playback normally.
** : **
** : **
2.
** : **
** : **
EXEC
3.
EXEC
EXEC
EXEC
EXEC