Buzzer Setup; Rear Terminal - JVC VR-509E Instructions Manual

Buzzer Setup

1. Press the [MENU] button.
• The [MENU] → [DETAIL OPERATION] → [Display/
Operation] → [BUZZER] screens will be displayed in this
sequence in accordance with the [MENU Screen
Operations] explained on page 17.
BUZZER
ALARM
HDD FULL
WARNING
VIDEO LOSS
HDD ERROR
FAN MOTOR ERROR
PASSCODE ERROR
BLACKOUT ERROR
REC STOP
BUTTON
2. Select your desired item with the [ / ] keys, and then
change the value of the setting with [–/+].
Settings
ALARM
OFF, ON
HDD FULL
OFF, ON
WARNING
OFF: The buzzer will not sound.
ALL: The buzzer will sound whenever any type of warning is
issued.
USER: Selects whether or not to set the buzzer for sounding
depending on the warning type.
Warning Types
VIDEO LOSS, HDD ERROR, FAN MOTOR ERROR,
PASSCODE ERROR, BLACKOUT ERROR, REC STOP
Selection:
OFF, ON
* The buzzer will not sound even when the warning
buzzer parameter has been set at "ON" if the
[WARNING] setting on the [ONSCREEN MODE]
menu has been set at "OFF".
* The buzzer will not sound even when the REC STOP
buzzer parameter has been set at "ON" if the [REC TO
STOP MESSAGE] setting on the [ONSCREEN
MODE] menu has been set at "OFF".
Button Beeps
OFF, ON
3. Press the [SET] button.
• The confirmation screen will be displayed.
4. Select [SAVE] with the [ / ] keys, and then press
[SET].
OFF
OFF
OFF
OFF
OFF 2.
OFF
OFF
OFF
OFF
ON

REAR TERMINAL

1. Press the [MENU] button.
• The [MENU] → [DETAIL OPERATION] → [Display/
Operation] → [REAR TERMINAL] screens will be
displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
REAR TERMINAL
EXT REC
REC OUT
WARNING OUT
VIDEO LOSS
HDD ERROR
FAN MOTOR ERROR
PASSCODE ERROR
BLACKOUT ERROR
2. Select your desired item with the [ / ] keys, and then
change the value of the setting with [–/+].
Settings
EXT REC
See page 29.
REC OUT
OFF: Signals not output.
ALL: Signals output during recording.
ALARM REC: Signals only output during alarm recording.
STOP REC: Signals output when recording stopped.
WARNING OUT
OFF: Signals not output.
ALL: Signals output when warnings are issued.
USER: Selects whether or not to output signals depending on
the warning type.
Warning Types
VIDEO LOSS, HDD ERROR, FAN MOTOR ERROR,
PASSCODE ERROR, BLACKOUT ERROR
Selection:
OFF, ON
3. Press the [SET] button.
• The confirmation screen will be displayed.
4. Select [SAVE] with the [ / ] keys, and then press
[SET].
Useful Features Using a PC
OFF
OFF
OFF
OFF
2.
OFF
OFF
OFF
OFF
49