JVC VR-509E Instructions Manual page 99

Troubleshooting (continued)
Other Problems
Onscreen Display
Power cannot be turned on.
[REC] and [PLAY] buttons do
not work.
Playback image is not
displayed on the monitor.
Unable to start program
recording using the Program
Timer
Menu screen is not displayed.
No onscreen display of date/
time and title.
Date/Time is not recorded.
[TIMER] indicator blinks.
Unable to play back audio
sound.
Unable to execute Skip Jump
or Direct Jump
Cannot mount rack fittings
→ Check to ascertain that the power cable has been plugged in correctly.
→ Check to ascertain if the OPERATION LOCK is activated.
→ Check to ascertain if the TIMER STANDBY mode is activated.
→ Check the monitor connection.
→ Select a camera that has a recorded image.
→ Check the DATE/TIME settings.
→ Check to ascertain if the TIMER STANDBY mode is activated.
→ Check the TIMER PROGRAM.
→ Check to ascertain if the OPERATION LOCK is activated.
→ Check to ascertain if the TIMER STANDBY mode is activated.
→ Check to ascertain that the settings on the "ONSCREEN DISPLAY
SETTINGS" screen are set to "ON".
→ Check the DATE/TIME settings.
• The PROGRAM TIMER has not been reserved, or there is no recording
reservation that can be executed.
→ Check the PROGRAM TIMER.
• There is no space left on the hard disk.
→ Format the hard disk to create recording space or set Repeat REC to
values other than "OFF".
→ Make recordings with the "AUDIO REC" in the "DETAIL REC" menu set
to "ON".
* Sound audio cannot be recorded when the "F.RATE" setting on the
"OPERATION SET" menu has been specified as "0.08" or "0.2".
→ Check the DATE/TIME setting.
→ Check the SKIP setting.
→ Rack mount fittings are optional. Please consult the nearest JVC dealer
for details.
Cause and Recovery
Explanations
Refer to
Page
–
P48
P38, P39
P15
P41
P19
P38
P39
P48
P38
P25
P19
P38, P39
P51, P32
P30, P31
P19
P44
–
99