Setting Up The Detail Rec - JVC VR-509E Instructions Manual

Recording Camera Images

Setting up the DETAIL REC

1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in MENU Screen Operations (page 17) in the
sequence of "MENU" → "DETAIL REC".
DETAIL REC
OPERATION SET ..
NOMALLY AUDIO REC
ALARM AUDIO REC
ALARM TERMINAL ..
ALARM REC ..
EMERGENCY REC
PASSCODE ERROR REC
TIMER/MODE(REC PATERN)
WEEKLY TIMER ..
DATE TIMER ..
WATER MARK
2. Select your desired item with [ / ], and then change
the setting with [–/+].
Settings
NOMALLY AUDIO REC
OFF: No audio signals recorded.
ON: Audio signals recorded.
* Audio sound will not be recorded when the frame
rate per second is set at 0.08 or 0.2. (See page 31)
(Page 45 "AUDIO OUT")
ALARM AUDIO REC
OFF: No audio signals recorded.
ON: Audio signals recorded.
* Audio sound will not be recorded when the frame
rate per second is set at 0.08 or 0.2. (See page 31)
(Page 45 "AUDIO OUT")
EMERGENCY REC
Sets the recording time when the EMERGENCY REC terminal
is input.
OFF: Not record.
30SEC, 1MIN, 5MIN, 10MIN, 20MIN:
records in the set duration.
CONTINUE: Continue recording by the user performs the
recording stop operation.
MANUAL: Continues recording while the signal is being
input.
MEMO
The recording frame rate will be the total number of frames
divided equally into the value entered for emergency
recording when emergency recording (passcode error
recording) is in operation (Total frame count: See page 31).
30
ON
ON
1 MIN
2.
10 SEC
PROGRAM TIMER
OFF
PASSCODE ERROR REC
Sets whether recording is to be carried out or not when an
illegal passcode has been detected. Recording will be started
with the same settings as [EMERGENCY] recording.
However, it is not possible to forcibly stop recording by pressing
the [CANCEL] button.
OFF: Recording not started when the wrong passcode is
entered.
10 SEC, 20 SEC, 30 SEC:
Starts recording only to the period of time set when the
wrong passcode is entered.
(Page 54 "Pass Code Setup")
TIMER/MODE (REC PATTERN)
PROGRAM TIMER:
Records according to weekly program timer or daily
program timer.
REC PATTERN 1-9:
Records according to the respective operation setting.
WATER MASK
OFF: The WATER MASK function is deactivated.
ON: The WATER MASK function is activated.