Changing Network Settings; Setting A Network Address; Registering An Access User; Access User Confirmation Screen - JVC VR-509E Instructions Manual

Changing Network Settings

0

Setting a Network Address

1. Click on "NETWORK" → "ADDRESS" in that order.
2. Change the settings. (For more details, see page 66)
• When network settings of VR-509 are changed, network
settings need to be altered according at the PC. Consult
the network administrator when making alterations.
• Upon changing network settings of VR-509, change the
network settings at the PC as well, followed by restarting
the Web browser.
3. Click on the [SAVE] button.
(Click on the [RESET] button to return to the setting values
on the main unit.)

Registering an ACCESS USER

1. Click on "NETWORK" → "ACCESS USER SETUP" in
that order.
2. Enter/selection user information.
Settings
USER NAME
Enter within 32 single-byte characters.
LOGIN NAME
Enter within 32 single-byte alphanumerals.
PASSWORD
Enter within 8 single-byte alphanumerals.
PASSWORD (AGAIN)
Enter the password once again for confirmation purposes.
ACCESS RIGHTS
Select from either Administrators, Operators or Users.
82
Changing Network Settings
Live Image
Screens
2.
Search
Recording
3. Reservation
Displays
Main Unit
Displays
Main Unit
Operations
Network
Utilities
3. Click on the [SAVE] button.
Click on [RESET] to clear the entry.

ACCESS USER Confirmation Screen

1. Click on "NETWORK" → "ACCESS USER
CONFIRMATION".
2.
3.
2. This screen enables the access user profiles to be
checked.
3. Press the [UPDATE] button to make any amendments.
4. Press the [DELETE] button to delete users.
MEMO
The following two user names are registered when the VR-
509E is shipped from the factory.
ACCESS RIGHTS
Access rights for each menu:
Administrators
Event
Timer
WEB
Status
USER NAME admin
PASSWORD vr-509
Administrators
Operators Users
×
×
×
×
× ×
× ×
2.
3.
4.
1 2
guest
vr-509
Operators