Live Screen Search; Playback Screen Search - JVC VR-609 Instructions Manual

3.6.3 Live Screen Search

①This is for searching 1, 4, or 9 channels simultaneously from a remote location.
②When there is an alarm input from an Alarm In connector, it will be displayed on a
screen upper left as "Sensor." When there is a motion detection, it will be displayed as
"Motion."
・When the image from DVR is not updated, please press the "update" button of the
Web browser.
■ It is possible to control the Pan/Tilt camera, which allows to set-up the position of
the Pan/Tilt camera from a remote location.
・Pan/Tilt control : Possible to PAN, TILT and ZOOM by clicking the button on the web
screen.
When operating a Pan/ Tilt camera via a network, the amount of operation for
!
every click changes with the numbers of split screens etc. The full screen
display is suitable to tune finely.

3.6.4 Playback Screen Search

This is for searching playback screens. It is possible to check date and time.
!
・Remote monitoring is limited to 6 persons for assurance of the reliability of the system.
・Only one person is allowed to see the web playback screen.
・Possible to restrict remote user by password.
・Possible to delay because of system status.
・The reliability of remote monitoring is subject to the reliability of the Internet connection.
(Try rebooting the system in case of Internet malfunctioning.)
・HDD content for backup can not be replayed from remote software.
②
-- 33 --
Live Screen Search
(See 5.7.7.4 Web password (P.81))
VR-609
①
Playback Screen
Search