Split Picture; Onscreen Mode - JVC VR-509E Instructions Manual

SPLIT PICTURE

Sets whether or not to display each screen with automatic
switching when in the split picture mode.
1. Press the [MENU] button.
• The [MENU] → [DETAIL OPERATION] → [MONITOR]
→ [SPLIT SCREEN] screens will be displayed in this
sequence in accordance with the [MENU Screen
Operations] explained on page 17.
SPLIT PICTURE
4 DIVISION
4 DIVISION-A
4 DIVISION-B
4 DIVISION-C
2. Select your desired item with the [ / ] keys, and then
change the value of the setting with [–/+].
Settings
4 DIVISION A
DISABLE: Skipped.
ENABLED:Displayed.
4 DIVISION B
DISABLE: Skipped.
ENABLED:Displayed.
4 DIVISION C
DISABLE: Skipped.
ENABLED:Displayed.
3. Press the [SET] button.
• The confirmation screen will be displayed.
4. Select [SAVE] with the [ / ] keys, and then press
[SET].
ENABLE
2.
ENABLE
ENABLE

ONSCREEN MODE

Sets whether or not each of the settings are to be displayed
during the ONSCREEN mode.
1. Press the [MENU] button.
• The [MENU] → [DETAIL OPERATION] → [DISPLAY/
OPERATIONS] → [ONSCREEN MODE] screens will be
displayed in this sequence in accordance with the
[MENU Screen Operations] explained on page 17.
ONSCREEN MODE
DATE/TIME
ALARM COUNT
ALARM DETECT
DISK CAPACITY
PLAYBACK SET
CAMERA TITLE
WARNING
REC TO STOP MESSAGE
2. Select your desired item with the [ / ] keys, and then
change the value of the setting with [–/+].
Settings
• DATE/TIME: Displays the date and time.
• ALARM COUNT:
Displays the alarm number (displayed as
AL-**.) The most recently recorded alarm
number will be displayed for live images.
The alarm number for the recording being
played back will be displayed when playing
pack ALARM REC images.
• ALARM DETECT:
|-AL-| will be displayed in red when an alarm
is triggered.
• DISK CAPACITY:
Displays the remaining disk capacity when
the [REPEAT REC] parameter has been set
at OFF (displayed as **%).
The remaining disk capacity will not be
displayed when the [REPEAT REC]
parameter is set at "AL" or "ALARM LOCK".
• PLAYBACK SET:
Displays the playback mode (
and the operation status (blue circle, etc.)
• CAMERA TITLE:
Displays the camera title that corresponds
with the camera that is currently set.
* The camera title will not be displayed for
camera playback images that have been
deleted after recording.
• WARNING:
The on-screen warning and LED warning
displays when a warning is triggered.
(Example: MAINTENANCE PROCEEDING.)
• REC TO STOP MESSAGE:
The "The record stopped" on-screen display
and LED warning display.
Values
ON: Displayed.
OFF: Not displayed.
3. Press the [SET] button.
• The confirmation screen will be displayed.
4. Select [SAVE] with the [ / ] keys, and then press [SET].
* DISK CAPACITY display:
Viewing Live Camera Images
ON
ON
ON
ON
2.
ON
ON
ON
ON
or , etc.,)
25