Setting Up The Hard Disk For Mirroring - JVC VR-509E Instructions Manual

Useful Features Using a PC

Setting up the Hard Disk for Mirroring

Mirroring refers to recording the same data in the 2 built-in hard
disks. In this way, recorded data can be secured even if data on
one of the hard disks is damaged.
(See on page 53 for the notes on "Setting up MIRRORING")
Setting up MIRRORING
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of "MENU" → "DETAIL OPERATION" →
"MAINTENANCE" → "MIRRORING".
MIRRORING
CAP
ID
IDE1 149GB
IDE2 149GB
EXTRNL --- GB
MIRRORING SETTING
2. Check if [YES] is selected in the [MIRRORING
SETTING], and then press the [SET] button.
• The "MIRRORING SET" confirmation screen will be
displayed.
3. Press the [SET] button once again.
• The set up procedure requires approximately 90 minutes
for completion.
Do not turn off the power during MIRRORING.
• The "MIRRORING SETTING SUCCEEDED" screen will
be displayed when the set up procedure has been
completed. Operations will then automatically return to
normal.
CAUTION
The mirroring settings cannot be executed when in the
following operation modes:
• During recording.
• During the playback of recorded images.
• When the timer is ON.
• During DVD export.
• When a malfunction occurs with the hard disk.
52
STATUS
NORMAL
NORMAL
DISCONNECT
2.
YES
Canceling MIRRORING
1. Press the [MENU] button.
• Opens the menus in accordance with the instructions
provided in Changing MENU Settings (page 17) in the
sequence of "MENU" → "DETAIL OPERATION" →
"MAINTENANCE" → "MIRRORING".
MIRRORING
CAP
ID
IDE1 149GB
IDE2 149GB
EXTRNL --- GB DISCONNECT
MIRRORING SETTING
• The MIRRORING SETTING screen will be displayed.
2. Check if [NO] is selected in the "MIRRORING
SETTING", and then press the [SET] button.
• The "MIRRORING CANCELLATION" confirmation
screen will be displayed.
3. Press the [SET] button once again.
• The MIRRORING SETTING will be cancelled, and the
MIRRORING mode will be disabled.
Do not turn off the power during cancelling
MIRRORING.
• The "MIRRORING CANCELLATION SUCCEEDED"
screen will be displayed when the procedure has been
completed. Operations will then automatically return to
normal.
STATUS
NORMAL
NORMAL
2.
NO