Record Program Using A Pc; Adding To The Weekly Timer; Changing And Deleting The Weekly Timer - JVC VR-509E Instructions Manual

Record Program Using a PC

Adding to the Weekly Timer

1. Click on [TIMER RECORDING] → [WEEKLY TIMER].
• The [WEEKLY TIMER SETUP] and program list (weekly
timer settings) screen will be displayed.
2. Select the [PROGRAM] number against which
recording is to be reserved.
3. Enter the [START] and [END] times.
4. Select [MODE].
5. Select [ON], [OFF] or [WEEKLY] for [EXEC].
* [WEEKLY] cannot be selected if [DAILY] has been set for
[START].
6. Set the days on which recording is to be carried out in
[DAILY MODE] if [DAILY] has been selected for
[START].
* These fields will be grayed out and selection not possible
if any setting other than [DAILY] has been selected for
[START].
7. Click on the [SAVE] button.
(Click on [RESET] to clear the settings already made.)
• The settings will be saved.
• The updated program list (weekly timer settings) screen
will be displayed.
Program List (Weekly Timer Setting) Screen
Click on [CLOSE] to close the window.
70
Record Program Using a PC

Changing and Deleting the Weekly Timer

1. Click on [TIMER RECORDING] → [WEEKLY TIMER].
• The [WEEKLY TIMER SETUP] and program list (weekly
timer settings) screen will be displayed.
2.
3.
4.
5.
6.
7.
Changing the Programs
2. Click on the [UP] button.
• A confirmation screen showing the amendments will be
displayed.
3. Click on the [UP] button on confirmation screen.
• The program will be updated.
• The updated program list (weekly timer settings) screen
will be displayed.
Deleting the Programs
2. Click on the [DEL] button.
• A confirmation screen showing the details to be deleted
will be displayed.
3. Click on the [DEL] button on confirmation screen.
• The program will be deleted.
• The updated program list (weekly timer settings) screen
will be displayed.
2.