Skip Jump - JVC VR-509E Instructions Manual

Explanations

Skip jump

There are 3 types of Skip Jump, namely "TIME", "ALARM" and
"EVENT", which can be specified in the search menu. Display
the "SKIP MODE" in SKIP PLAY to execute SKIP button
setting. (Page 44)
SKIP PLAY
SKIP PLAY
SKIP MODE
TIME JUMP
When "TIME" is selected
• Selecting "1HOUR" for Time Jump Setting enables
jumps in 1 hour intervals every time the [SKIP] button is
pressed. Jumps to the closest position from the specified
time onwards if the time to jump to is not found.
10:30 12:00 12:15
Record Stop Record
Event1
1HOUR 1HOUR
10:30 11:30
When "ALARM" is selected
• Pressing [SKIP] each time enables a jump to the start
position of alarm or sensor recording.
Event2
Event1
(Alarm1)
• The display will jump to the starting position of the pre-
alarm recording when pre-alarm recordings exist.
106
OFF
TIME
Set
5MIN
13:00 15:00
Stop Record
Event2 Event3
12:30 15:00
Event4
Event3 Prealarm
(Alarm2)
When "EVENT" is selected
• Pressing [SKIP] each time enables a jump to the start
position of recording (start of an event).
Event2
Event1 Event3
(Alarm1)
SKIP PLAY
If the [SKIP] button is pressed during playback with the [SKIP
PLAY] setting on the [SKIP PLAY] menu temporarily set to "10
SEC", the playback and skip operations will be repeated at
intervals of ten seconds until no more relevant recorded images
can be found.
Event 1
10 sec.
Event4
Prealarm
(Alarm2)
Event 2
10 sec.