Useful Functions Using A Pc; Inputting A Camera Title; Covert Channel Setting For Live Image/Playback Display Screen - JVC VR-509E Instructions Manual

Useful Functions Using a PC

Inputting a Camera Title

1. Click on "DISPLAY" → "CAMERA TITLE" in that order.
* When [CAM1 to CAM9] for the [INPUT NO.] is grayed out,
it indicates that the camera input setting for
[INTRODUCTION SET-1] is set at [DISCONNECT]. (See
page 20)
CAUTION
There are cases where the camera title will not be
displayed normally on the [DISPLAY] → {CAMERA TITLE}
field on personal computers if it has been set at ["] on the
VR-509E's [CAMERA TITLE] setup screen.
2. Click on your desired checkbox.
• It is not possible to enter camera titles unless the
relevant checkbox has first been clicked.
3. Enter the camera title.
Valid Characters
A maximum of twenty single-byte alphanumerals may be used
for entering the camera title.
4. Click on the [SAVE] button.
• Make sure that all camera titles that need to be changed
have been entered before pressing the [SAVE] button.
• The camera titles that have been left blank when the
[SAVE] button is pressed will be initialized.
• Character amendments are not possible once the
[SAVE] button has been pressed. The entire title must be
entered in full once again.
• Click on the [RESET] button to return the settings to the
VR-509 default settings.
76
Useful Functions Using a PC
Covert Channel Setting for Live image/
Playback display screen
1. Click on "WEB" → "COVERT CHANNEL" in that order.
2.
3.
4.
2. Change the setting. (See on page 27 for details)
3. Click on the [SAVE] button.
• (Click on "RESET" to return to the setting values on the
main unit.)
2.
3.