Adjusting The Picture Quality; Setting The Progressive Mode; Time Search - JVC DR-M100S Instructions Manual

CANCEL
ENTER
S
ON SCREEN

Time Search

You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a programme
(DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video
CD/SVCD and Audio CD).
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select Aj9B, then press ENTER. The
pop-up window appears under the selected item.
DVD-VIDEO
CINEMA
: :
TIME
3
Press the number keys to enter the desired title or chapter
number, then press ENTER. Playback starts from the specified
time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
TIME
Press 1
TIME
Press 5
TIME
If you have specified a wrong number
Press CLEAR(o) or CANCEL on the remote control and re-enter
again.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
●
When A7B is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
●
Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, A7B
is displayed on the TV screen as well.
●
This function is not possible for a Video CD/SVCD with PBC
function.
0-9
Selection Keys
(FGDE)
I
T
CLEAR (o)
AUTO 1
ENTER
TIME
Press 2
TIME
Press 0
BASIC OPERATIONS ON DVD DECK

Adjusting The Picture Quality

You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select A
pop-up window appears under the selected item.
DVD-VIDEO
CINEMA
NORMAL
CINEMA
SHARP
SOFT
3
Press selection keys to select the desired option, then press
ENTER.
NORMAL
:
Normally select this.
CINEMA
:
Suitable for a movie disc, etc.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-coloured surfaces such as cartoons.
SOFT
:
Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.

Setting The Progressive Mode

You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1
Set the unit to the progressive scan mode. (A pg. 64)
2
Press ON SCREEN twice to access the on-screen bar.
3
Press selection keys to select A
pop-up window appears under the selected item.
DVD-VIDEO
4
Press selection keys to select the desired option, then press
ENTER.
AUTO 1
:
This mode automatically detects film and video content for
progressive playback. When film content is found, flag
detection is used to invoke playback of film data in full screen.
When video content is found, pictures from multiple fields are
used to detect sections with movement, and then this
movement undergoes advanced image processing for output of
sharp, detailed progressive images without any reduction in
image quality where movement occurs. Normally, operation in
this mode is recommended.
AUTO 2
:
Only the processing of sections with movement differs from
AAUTO 1B.
For video contents, the sections with movement are detected
and the pictures are corrected by the filtering process for
motion pictures.
FILM
:
Suitable for playing back a progressive scanned film source disc.
B, then press ENTER. The
AUTO 1
B, then press ENTER. The
SHARP AUTO 2
AUTO 1
AUTO 2
FILM
VIDEO
33
EN