Tool Pressure Adjustment - Roland VersaCamm SP-540V Service Notes

4-12 TOOL PRESSURE ADJUSTMENT (Referential Time : 15min.)
[About TOOL PRESSURE ADJUSTMENT]
This adjustment is for having the correct tool pressure.
Perform this adjustment at the right end of BED. There is no H mark.
Remove the I/S COVER,LEFT COVER,FRONT
1
COVER and FRONT RAIL COVER.
Turn on the sub power switch while pressing [ ], [ ]
2
and [ ] keys to enter the SERVICE MODE.
Select [FORCE ADJUST] in the SERVICE MODE.
3
When you enter the [FORCE ADJUST] menu,
you can move only the TOOL CARRIAGE.
LEFT COVER
FRONT COVER
[ ], [
Menu
SERVICE MENU
MENU
SERVICE MENU
SERVICE MENU
FORCE ADJUST
4-47
FRONT RAIL COVER
I/S COVER
], [ ] + POWER ON
[ MENU ] key
4