3-14 FLEXIBLE CABLE REPLACEMENT
This is a procedure to replace the FLEXIBLE CABLE
between the SERVO BOARD and the TOOL CARRIAGE.
Remove the following covers.
1
LEFT COVER
I/S COVER
FRONT RAIL COVER
FRONT COVER
Turn on the SUB POWER SW while pressing the Left,
2
Right and Down keys to enter the SERVICE MODE.
Select [CAP&WIPER CTRL] > [CAP] > [OPEN], and
3
press the [ENTER] key. The CAPPING UNIT moves
down and allows you to move the HEAD CARRIAGE by
hand.
Move the HEAD CARRIAGE slowly leftwards.
4
Be careful that the head does not strike the
media or media clamp.
Revised 4
FRONT RAIL COVER
LEFT COVER
[
], [
MENU
SERVICE MENU
SERVICE MENU
CAP&WIPER CTRL
CAP&WIPER CTRL
CAP
CAP
OPEN
3-47
I/S COVER
FRONT COVER
], [
] + POWER ON
[MENU] key
[
]
[
]
[ENTER]