Roland VersaCamm SP-540V Service Notes page 49

5 Remove the I/S COVER.
6 Select [CAP&WIPER CTRL] > [CAP] > [OPEN], and
press the [ENTER] key. The CAPPING UNIT moves
down and allows you to move the HEAD CARRIAGE by
hand.
7 Turn off the SUB POWER SW, and then turn off the
MAIN POWER SW.
Be sure to turn off the MAIN POWER SW
when replacing the head. The head or main
b o a r d c o u l d b r e a k , o t h e r w i s e .
recommended to disconnect the AC code.
8 Remove the CARRIAGE COVER.
SERVICE MENU
CAP&WIPER CTRL
CAP&WIPER CTRL
CAP
CAP
OPEN
I t i s
3-4
I/S COVER
[ ]
[ ]
[ENTER]
MAIN POWER SW
CARRIAGE COVER