Roland VersaCamm SP-540V Service Notes page 78

After turning on the Main Power SW, turn on the Sub
17
Power SW while pressing the Left, Right and Down keys
to enter the SERVICE MODE.
Select [CAP&WIPER CTRL] > [CAP] > [UP], and press
18
the [ENTER] key to move up the capping unit 1 step.
Check that the GUIDEs at the two ends of the capping
unit align with the GUIDEs at the two ends of the head
carriage. Then press the [ENTER] key twice more to
cap the heads.
From the menu (NOT from the service menu), select
19
[INK CONTROL] > [FILL INK], and press the ENTER
key.
[ ], [
MENU
SERVICE MENU
MENU
INK CONTROL
3-33
], [ ] + POWER ON
[MENU] key
INK CONTROL EMPTY MODE
EMPTY MODE STOP
INK CONTROL
FILL INK
INK CONTROL
PUMP UP
INK CONTROL
HEAD WASH
INK CONTROL
HEAD REPLACE
STOP