Installing The Cutting Tool; Step 1: Assemble The Cutting Tool - Roland VersaUV LEC2-330 Setup Manual

3. Installing the Cutting Tool

CAUTION
CAUTION

Step 1: Assemble the Cutting Tool

Blade holder
Procedure
A
Insert the pin.
Insert the pin to the position where its end sticks out about 3 to 5 millimeters (0.12 to 0.20 in.).
B
Insert the blade.
Insert the blade into the hole.
Blade
40
Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the blade.
Doing so may result in injury. The cutting performance of the blade will also be
impaired.
Required items
Blade
Pin
Tip
Pin