Roland VersaCamm SP-540V Service Notes page 128

Loosen four screws for fixing the CAPPING UNIT.
7
Move the HEAD CARRIAGE to the lock position by
8
hand.
After the HEAD CARRIAGE is locked, push the
Head Carriage to the left until it stops because there
is a play with the HEAD CARRIAGE.
Adjust the position of CAPPING UNIT by moving it left
9
and right by hand so that the caps come straight below
the each head.
Move the CAPPING UNIT up and down with the cursor
keys, and cap the heads at that position.
Fix the four screws for fixing the CAPPING UNIT at
10
that position.
Press the [ENTER] key.
4 screws for fixing the CAPPING UNIT
4 screws for fixing the CAPPING UNIT
4-31
4