Service Mode - Roland VersaCamm SP-540V Service Notes

4-2 SERVICE MODE

[ ], [ ], [ ] + POWER ON
[ MENU ] key
SERVICE MENU
HEAD RANK
4
SERVICE MENU
SERIAL NO.
SERVICE MENU
CAP&WIPER CHECK
SERVICE MENU
SENSOR CHECK
SERVICE MENU
CARTRIDGE
HEAD RANK
HEAD 1
HEAD RANK
HEAD 2
This menu is used for entering the HEAD RANK for each HEAD with 35 digit number and alphabet.
The digits can be changed with [ ] and [ ] keys and parameters can be changed with [ ] and [ ] keys.
Press the [ENTER] key to save the settings. Warning sound comes out when the CHECK SUM is not correct.
SERIAL NO.
ZR50000
This menu is used for entering the Serial No. of the machine.
The digits can be changed with [ ] and [ ] keys and parameters can be changed with [ ] and [ ] keys.
CAP&WIPER CHECK
This menu is used for checking the CAP & Wiper movement.
1. Move the Carriage to the position where it is above the Platen by hand.
2. Press the [ENTER] key to check the Cap, Wiper, Cap Motor, Cap Sensor, Wiper Motor and Wiper Sensor.
3. Checking finishes when the COMPLETED message appears.
FRSHOCPULWcw
H
***
**
This menu displays the status of the sensors. When the sensor is ON, * will be displayed.
Alphabet in the menu stands for F: Front Paper Sensor, R: Rear Paper Sensor, S: Crop-mark sensor,
H: Head Lock Sensor, O: Limit Sensor,C: Front Cover Sensor, P: Maintenance Cover Sensor,
U:Head Up Down Sensor, L: Sheet Load Sensor, W: Pinch Roller Sensor, c: Capping Sensor, w: Wiper sensor,
P: Display in the Maintenance Cover Sensor
R : I/S Cover is ON.
L : Maintenance Cover is ON.
* : I/S Cover & Maintenance Cover are ON.
Blank : I/S Cover & Maintenance Cover are OFF.
Alphabet of the 2nd page stands for Cartridge Sensor of each color and Ink Empty.
Blank : No Cartridge, Ink remaining
C : Cartridge installed, Ink remaining
E : No Cartridge, Ink empty
* : Cartridge installed, Ink empty
Head Up Down Sensor
H : Head is in a high position.
L : Head is in a low positon.
X : Sensor is abnormal. Check whether it attaches and is correct.
CARTRIDGE
IC CHECK
HEAD RANK 1
1234567 (1/5)
HEAD RANK 2
1234567 (5/5)
NOW PROCESSING..
At the time of checking
CAP&WIPER CHECK
COMPLETED
At the end of checking
1234
* EC
IC CHECK
SLOT 1 INSERT
IC CHECK
SLOT 1 ERROR
IC CHECK
SLOT 1 OK
Set the cartridge to the slot
in order from SLOT1 to SLOT4.
IC CHECK
COMPLETED
4-2
Error
Normal