Roland VersaCamm SP-540V Service Notes page 133

Select [OUTLEVEL CHECK] under the [CROPMARK
4
SENS] menu.
Press the [ENTER] key, and the Crop Mark will be
printed. Then the TOOL CARRIAGE moves on the
Crop Mark automatically.
4
Adjust the VR on the CARRIAGE BOARD so that the
5
"MAX" voltage displayed on the LCD will be 2.5 +/- 0.2V.
The voltage displayed in the LCD decreases
for some degree due to the ink drying.
Perform [OUTLEVEL CHECK] again and make sure
6
that the voltage is correct value.
If it is out of range, adjust it again.
SERVICE MENU
CROPMARK SENS
CROPMARK SENS
OUTLEVEL CHECK
VR
MIN 1.9V MAX 2.6V
4-36
[ ]
MIN 1.9V MAX 2.6V
[ 2.4V ]
[ 2.4V ]