Fix the PUMP COVER.
11
4
Confirm the CAPPING UNIT is capped at correct
12
position, press [ENTER] Key again.
After the LIMIT POSITION INITIALIZE is completed,
the message appears as shown in the figure.
TOOL CARRIAGE will be separated from the HEAD CARRIAGE.
13
Move the TOOL CARRIAGE with your hand until it makes
full contact with the LEFT FRAME and make the cutter down.
Carry out the CUT DOWN POSITION INITIALIZE by
14
pressing [ENTER] key.
PUMP COVER
DETECTING..
SETTING UP
CUTTER DOWN POS
DETECTING..
INITIALIZE
4-32
COMPLETED