Cap Top Replacement - Roland VersaCamm SP-540V Service Notes

3-3 CAP TOP REPLACEMENT

1 Remove the I/S COVER.
2 Turn on the SUB POWER SW while pressing the Left,
Right and Down keys to enter the SERVICE MODE.
3 Select [CAP&WIPER CTRL] > [CAP] > [OPEN], and
press the [ENTER] key. The CAPPING UNIT moves
down and allows you to move the HEAD CARRIAGE by
hand.
4 Move the HEAD CARRIAGE slowly leftwards so that it
is not above the capping unit.
Be careful that the head does not strike the
media or media clamp.
MENU
SERVICE MENU
SERVICE MENU
CAP&WIPER CTRL
CAP&WIPER CTRL
CAP
CAP
OPEN
3-11
I/S COVER
[MENU] key
[ ]
[ ]
[ENTER]