Registering Fpcard; Unregistering Fpcard; Emptying Fpcard; Dumping Fpcard - FingerTec AC900 User Manual

Registering FPCard

Register FPCard is a function whereby you want to use your FP Card in other terminals in
the company. Menu > User Manage > FPCard Mng > Reg FPCard > Show the Mifare Card
at the induction area > The LCD will display "Write Succ" to indicate that the process is suc-
cessful. Now you can gain access or report attendance using the FP card.

Unregistering FPCard

This is a function whereby you do not want to use your FP Card in any terminals in the
company. Menu > User Manage > FPCard Mng > Unreg FPCard > Show the Mifare Card at
the induction area > The LCD will display "Write Succ" to indicate that the process is suc-
cessful
The card is still valid but the card cannot be used in that particular terminal to gain access
or report attendance.

Emptying FPCard

MiFare card is writeable; therefore you can use it time and time again. To delete all the
information in the card, use Empty FPCard function.
Menu > User Manage > FPCard Mng > Empty FPCard > Show the Mifare Card at the induc-
tion area > The LCD will display "Write Succ" to indicate that the process is successful. Now
the card is empty and ready to accept enrollment.

Dumping FPCard

Fingerprint template stored in MiFare card can be transferred to the terminal by this simple
operation. Make sure that the card is containing fingerprint templates to proceed with this
operation.
Menu > User Manage > FPCard Mng > Dump FPCard > Show the Mifare Card at the in-
duction area > The LCD will display "Write Succ" to indicate that the process is successful.
Once copied, you can use fingerprint or the card on that particular terminal for access or
attendance.

Moving To FPCard

Fingerprint template stored in the terminal can also be transferred to the FP Card by this
simple operation. Once the process is done, the terminal deletes the fingerprint template
from its memory. Menu > User Manage > FPCard Mng > Move to FPCard > Show the Mifare
Card at the induction area > The LCD will display "Write Succ" to indicate that the process
is successful.

Changing FPCard

Press Menu > User Management > OK > Enroll User/Admin > OK > Register RFID > ESC >
Change Card ID > Key in original ID > OK > Wave new card > OK (Save)
33