Password Verification; Card Verification; Types Of Verification Method; Password/Card Verification - FingerTec AC900 User Manual

Some precautions have to be taken to get a good read every time.
·
Make sure the center point of your finger is placed in the middle of the scanner for a good
read.
Center point
·
Recommended to use index finger. The terminal accepts other fingers but index is the most
convenient.
·
Make sure the finger is not wet, too dry, injured or dirty
·
Do not press hard on the sensor, just place it comfortably
·
Avoid direct sunlight or bright light

PASSWORD VERIFICATION

Password can be an option for those who do not prefer to use other verification methods. To
verify using password, insert User ID > OK > insert password and press OK.

CARD VERIFICATION

Place the card on the card scanning area and the terminal reads and verifies.
Types of Verifi cation Method
The fingerprint terminals offer various verification methods which include fingerprint (FP), User
ID (PIN), Password (PW), RFID (RF). You can configure the terminal to offer multiverification
methods. Press Menu > Options > Access Options > Group VerType > Select the Group > OK >
Select the time > OK > Down arrow and select Verification Type > OK
The terminals support the following combinations of verification:
VERIFICATION TYPE
FP
PIN
PW
RF
FP/PW
FP/RF
PW/RF
PIN & FP
FP & PW
DESCRIPTION
Fingerprint only
User ID only
Password only
RFID Card only
Fingerprint or password
Fingerprint or RFID Card
Password or RFID Card
User ID and fingerprint
Fingerprint and password
19