Security Features
Security features help protect the information from the terminal from being accessed by
the unauthorized individuals.
ADMIN AFFIRM
Register an administrator to the system by enrolling, fingerprint or password to a user ID.
Press Menu > User Manage > Enroll Admin > Choose enrollment method > Perform enrol-
ment and Save. After enrolling an administrator, main menu can only be accessed by an
administrator.
TAMPER SWITCH
The fingerprint terminals come with a tamper switch located at the rear of the terminals.
During installation, the tamper switch is compressed against the back plate. Any attempt
to dismantle the terminal will trigger the alarm and "System Broken" will be displayed on
the panel.
Cleaning Fingerprint Terminal
CLEAN THE BODY
Use a dry cloth to clean the terminal's body. Do not use any liquids, household cleaners,
aerosol spray, solvents, alcohol, ammonia and abrasive solutions to clean the body of the
terminal because it could damage it.
CLEAN THE FINGERPRINT PRISM
Clean the fingerprint prism with a cellophane tape for (silicon coated prism). View the vid-
eo on how to clean the fingerprint prism at this link
fingertec.com/newsletter/enduser/
cleanfinger.html. For the non-coated prism, please use microfiber cloth.
Restarting and Resetting Terminal
If something isn't working right, try restarting or resetting the terminals
RESTART THE TERMINAL
Push the On/Off button or reset button on the terminal to restart the terminal. If you can't
restart the terminal, or if the problem persists, you might want to reset. Refer to page 11
and 12.
RESET THE TERMINAL
Menu > Option > System Option > Adv Opt > Rest terminal. Resetting of the terminal will
cause all your settings to return to the original factory settings. Make sure that you have
backed up all data before you proceed.
10