FingerTec k-Kadex User Manual

w w w . f i n g e r t e c . c o m w w w . f i n g e r t e c . c o m
A Firm Access with
FingerTec
k-Kadex
User Guide
1 A SLEEK ACCESS
The k-Kadex is the latest slave terminal from FingerTec, designed exclusively for card and
password access. The k-Kadex reads and records users' information such as users ID, password
and card information and directly transmits the information to a master terminal for verification
via Wiegand 26-bit output. It is compulsory for the master terminal to have a Wiegand 26-bit
input port to receive signals from the k-Kadex.
LED light indicator
The red light indicates standby
mode or failed verification. The
green light indicates that the
card information is being read
and sent to the master terminal
for verification.
Door bell button
Card scanning area
To scan and receive card
information for verification at
the master reader. Default card
type: RFID Card, 125kHz 40 to
80mm. Made to order: MIFARE,
13.56MHz 30 to 50mm
©
2015 Timetec Computing Sdn Bhd. All rights reserved • 082015
Connections &
2
Wiring Diagram
Color Wire Function
Red PWR
Supplies power (DC12V 1A) to k-Kadex
Black GND
Green WD0
Wiegand 26-bit output connects to a master
terminal's Wiegand 26-bits input
White WD1
Buzzer with Green LED input from the master terminal
Purple G LED
Grey R LED Buzzer with Red LED input from the master terminal
Blue Bell +
Dry contact to doorbell system (the doorbell system must have an
individual power supply.
Yellow Bell -
Rear of k-Kadex Terminal Rear of Master Terminal
Red Red
PWR
PWR
Black Black
GND GND
Green Green
WD0 INWD0
White White
WD1 INWD1
Purple
G LED
BEEP
Grey Grey
R LED
G LED
Blue Blue
Bell + R LED PWR
Yellow
Bell - GND
External Power Supply
Connect to master
PWR
+
External
_
door bell
GND
INWD0 +
Power supply
_
for door bell
INWD1
G LED
External doorbell system
R LED
*The doorbell is optional
Note:
There is only 1 black wire provided
which can be shared for the GND for power
supply and Wiegand 26-bit output.