Using Rs232; Using Rs485; Using Usb To Download/Upload Data; Communication Key - FingerTec AC900 User Manual

USING RS232

For connection via RS232, baudrate is the determinant of communication speed between
the terminal and the software. The higher the baudrate, the faster the speed is.
To turn on RS232 connection and set the baudrate: Press Menu > Options > Comm Opt > RS232 >
Change the RS232 connection to Y. To change baudrate: Press Menu > Options > Comm Opt >
Baudrate > Change the Baudrate accordingly.

USING RS485

For connection via RS485, baudrate is also the determinant of communication speed be-
tween the terminal and the software but the speed must be according to the speed of the
converter. Check your converter for the speed.
To turn on RS485 connection and set the baudrate: Press Menu > Options > Comm Opt > RS232 >
Change the RS485 connection to Y .
To change baudrate: Press Menu > Options > Comm Opt > Baudrate > Change the Baudrate accord-
ingly.

Using USB to Download/Upload Data

USB flash disk is useful in cases where the terminal is installed far from a PC or there is a
connection problem. To determine the type of USB compatible by the terminal, please
refer to this link at fingertec.com/newsletter/HL_74.html
USING USB
Press Menu > PenDrive Mgmt > Choose the operation that you want to carry via USB

Communication Key

Since the software is controlled by an activation code a and product key, set the COMM
key to zero. Press Menu > Options > Comm Opt > COMM Key > 0
16