Chapter 10 • Mifare Card Function; Fingerprint Card Key (Fp Card Key); Creating Pin Card; Enrolling Fp Card - FingerTec AC900 User Manual

10 • MIFARE CARD FUNCTION
This feature is not a default function and it's made upon request. Check your terminal card
NOTE system to identify the type of card the terminal is using. This feature is NOT available in AC900
and M2
This chapter covers the MiFare card system or better known in MC system. The terminals
accept MiFare card with specifications MF1S50/S70, 13.56MHz.

Fingerprint Card Key (FP Card Key)

FP Card Key function provides extra security to the MiFare card users. FP Card Key is a pass-
word with a maximum 6-digit code. Once you have inserted an FP Card Key into a terminal,
all the MiFare cards which are enrolled in this terminal will have this password. The terminal
will always check the password before verification is done.
To input the FP Card Key:
Key > Input the Password > OK

Creating PIN Card

PIN is known as a User ID. Enroll a fingerprint to obtain a User ID. To create a PIN Card, you
need to have a User ID or a PIN.
Menu > User Manage > FPCard Mng > Create PINCard > Input an ID > Show the card to
the induction area > The LCD will display "Write Succ" which indicates that the ID has been
transferred to the card and is not stored in the terminal anymore. After this registration, a
user can get access by using the card only.

Enrolling FP Card

Enroll FP is a function to store a fingerprint template into a MiFare card. Once the enroll-
ment is successful, the templates will no longer be kept in the terminal. Therefore, access
or attendance, you need to produce the card to the terminal to obtain verification. In your
card now stores your user ID and your fingerprint template.
Menu > User Manage > FPCard Mng > Enroll FPCard > Input a User ID > Register your fin-
gerprint > Show the Mifare Card at the induction area > The LCD will display "Write Succ" to
indicate that the process is successful

Creating FPCard

Create FPCard is a function that allows you to duplicate a fingerprint template already en-
rolled in the terminal to be copied into the card. Therefore, for access or attendance, you
can choose to use your card or your fingerprint.
Menu > User Manage > FPCard Mng > Enroll FPCard > Input a User ID (Make sure that this
User ID has been enrolled with a fingerprint > Show the Mifare Card at the induction area >
The LCD will display "Write Succ" to indicate that the process is successful.
Now you can gain access or report attendance using the card or the fingerprint.
32
Press Menu > Options > System Option > Adv Option > FP Card