Adding User Information; Deleting User; Access Level/Privilege - FingerTec AC900 User Manual

FP & RF
PW & RF
FP/ PW/ RF
FP & PW & RF
PIN & FP & PW
FP & RF / PIN
Go to Chapter 8: Access Options to learn more about Grouping and Group Definition.

Adding User Information

User information can be added into FingerTec fingerprint terminals through the TCMS V2
software. After the information is updated, sync TCMS V2 and the terminal to display the
information.

Deleting User

Only an administrator can do user deletion at the terminal. To delete certain user(s), press
Menu > User Manage > Delete > Input User ID > The terminal will tell you the verification
method enrolled by the user ID > OK > Prompting you to Delete User > Press OK > Confir-
mation is required > OK as Yes and Esc as No

Access Level/Privilege

The terminal offers various types of access level or privilege.
PRIVILEGE
Normal User
Enroller
Administrator
Supervisor
20
Fingerprint and RFID Card
Password and RFID Card
Fingerprint or Password or RFID. One method only
Fingerprint and password and RFID, all methods are required
User ID, fingerprint and password, all methods required
Fingerprint and RFID card or 1:1 fingerprint matching
WHAT CAN YOU DO?
Only use the terminal to verify your identity. You cannot access
into the Menu and make changes on settings and system
You are allowed to access into the menu to enroll user only.
You are allowed to access into the menu to enroll users only and
edit simple settings and system excluding access options and ad-
vanced options
You are allowed to access into the menu to enroll users and edit
settings and system