Chapter 1 • Getting Started; Viewing The User Guide In The Internet; Fingerprint Terminal Included Accessories - FingerTec AC900 User Manual

1• GETTING STARTED

Viewing the User Guide in the Internet

The User Guide is available in the package when you purchased the fingerprint terminal.
The User Guide is also available online at
the language that you prefer for your User Guide.

Fingerprint Terminal Included Accessories

AC900 MODEL
WelcomeCheck-In
Fri
01-01 09:00
Screwdriver
Use the screwdriver to open the back
plate of fingerprint terminal and to install
the back plate against a wall.
A Packet of Bolts
Attach the back plate of the terminal
against a wall using the screws provided.
R2 or M2 MODEL
1
2 3 ESC
4
5 6
7
8 9
0 OK
MENU
A Packet of Bolts
Use the screws to hold
the back plate of the
terminal against a wall.
fingertec.com
USB Extension
For USB Flash disk connectivity in
fingerprint terminal for downloading
and uploading of data.
Screwdriver
Use the screwdriver to open the back
plate of fingerprint terminal and to
install the back plate against a wall.
RFID Cards (5 pieces)
* Exclusively for R2 model only
For card enrollment and verification.
and user.fingertec.com. Choose
AdapTec AC
Supplying power and door access
controller to the terminal.
TCP/IP Connector
Connecting the network cable from
a PC or Network switch to a TCP/IP
connector at the terminal.
TCP/IP Cable
Connecting fingerprint terminal for
Ethernet connection.
5