Chapter 11 • Hid Card Function; Registering Hid Card; Deleting Hid Card - FingerTec AC900 User Manual

11 • HID CARD FUNCTION
This feature is not a default function and it's made upon request. Check your terminal card
NOTE system to identify the type of card the terminal is using. This feature is NOT available in AC900
and M2.
The terminals accept HID card with specifications 1325, 26-bit, 125kHz. The Prox II card
support 26-bit and it comes with unique programming information into its contents,
which include card reading bits, card number range, facility code, site code, etc. HID card
also applies encryption to the contents o the card to maintain high level of security and to
eliminate duplications.

Registering HID Card

Registration of HID card is similar to registration of normal RFID card. Press Menu > User
Manage > Enroll User/Admin > Reg RFID > Do you want to do new enrollment? > Insert
user ID > Wave the card to the induction area and the machine will display the card number
along with the user ID on the LCD > The terminal will display UserID-C indicating that the
user ID has been enrolled with card > OK(Save)

Deleting HID Card

HID card can be used again and again but the information in the card must be deleted first
before inserting new information.
Press Menu > User Manage > Delete > Input the User ID and wave the card at the induction
area > The LCD will ask whether you want to delete the User ID-C > The terminal will ask
whether you want to delete User ID > And to delete user. Press OK to all.
Once the card has been emptied, it can be used again.
34