Unregistering Fpcard; Emptying Fpcard; Dumping Fpcard; Changing Fpcard - FingerTec R2 User Manual

Registering FPCard
Register FPCard is a function whereby you want to use your FP Card in other terminals
in the company. Menu > User Manage > FPCard Mng > Reg FPCard > Show the Mifare
Card at the induction area > The LCD will display "Write Succ" to indicate that the proc-
ess is successful. Now you can gain access or report attendance using the FP card.
Unregistering FPCard
This is a function whereby you do not want to use your FP Card in any terminals in the
company. Menu > User Manage > FPCard Mng > Unreg FPCard > Show the Mifare
Card at the induction area > The LCD will display "Write Succ" to indicate that the proc-
ess is successful
The card is still valid but the card cannot be used in that particular terminal to gain
access or report attendance.
Emptying FPCard
MiFare card is writeable; therefore you can use it time and time again. To delete all the
information in the card, use Empty FPCard function.
Menu > User Manage > FPCard Mng > Empty FPCard > Show the Mifare Card at the
induction area > The LCD will display "Write Succ" to indicate that the process is suc-
cessful. Now the card is empty and ready to accept enrollment.
Dumping FPCard
Fingerprint template stored in MiFare card can be transferred to the terminal by this
simple operation. Make sure that the card is containing fingerprint templates to pro-
ceed with this operation.
Menu > User Manage > FPCard Mng > Dump FPCard > Show the Mifare Card at the
induction area > The LCD will display "Write Succ" to indicate that the process is suc-
cessful.Once copied, you can use fingerprint or the card on that particular terminal for
access or attendance.
Moving To FPCard
Fingerprint template stored in the terminal can also be transferred to the FP Card by
this simple operation. Once the process is done, the terminal deletes the fingerprint
template from its memory. Menu > User Manage > FPCard Mng > Move to FPCard
> Show the Mifare Card at the induction area > The LCD will display "Write Succ" to
indicate that the process is successful.
Changing FPCard
Press Menu > User Management > OK > Enroll User/Admin > OK > Register RFID > ESC
> Change Card ID > Key in original ID > OK > Wave new card > OK (Save)
2
CONTENTS