12 •
AUTO TEST
Who should do the Auto Test?
Auto Test page is to diagnose or analyze the conditions in the terminal. There are 6 tests
available in the Auto Test page and only administrator is allowed to perform the test. Be-
fore running any tests, kindly contact your reseller for advice or you could email
support@
fingertec.com.
Run All Tests At Once
The Auto Test contains 6 tests and to run all of them at once, Press Menu > Options > Auto
Test > Run All Test > OK > Pls keep Pwr On message will be displayed > The terminal will
run all tests and when finished the LCD will display the result such as this: All: 31 Bad: 0, to
indicate the level of breakdown in the terminal.
FLASH Test
Press Menu > Options > Auto Test > FLASH test > OK > Pls keep Pwr On message will be
displayed > The terminal will run all tests and when finished the LCD will display the result
such as this: All: 31 Bad: 0
LCD Test
Press Menu > Options > Auto Test > LCD test > OK > The screen will display lines of 'W'. Any
missing Ws or jagged W indicates LCD error. Escape to return to the previous page
Voice Test
Press Menu > Options > Auto Test > Voice test > OK > The LCD will display for example:
Play Voice 1 and you will hear the message for that. Press OK to listen to the next voice. Any
error indicating something is wrong with the speaker.
FP Reader
Press Menu > Options > Auto Test > FP Reader > OK > If your fingerprint sensor is not in
good condition, you will see "OK!"
Key Test
Press Menu > Options > Auto Test > Key Test > OK > Press any key and look at the LCD
display. If the key matches the description on the LCD, the keypad is in good condition
RTC Test
Press Menu > Options > Auto Test > RTC test > OK > If the RTC battery is still working, the
test will prompt an "OK!"
35