Chapter 9 • Rfid Card Function; Enrollment Of Rfid Card; Verification Using Rfid Card Only; Multi Verification Methods Using Rfid - FingerTec AC900 User Manual

9 • RFID CARD FUNCTION
NOTE
This feature is NOT available in AC900 & M2
The fingerprint terminals are versatile and it can accept card verifications. Refer to page 8.
This chapter covers the Radio Frequency Identification or better known as RFID system.
The terminals accept RFID card with specifications of 64-bit, 125kHz.

Enrollment of RFID Card

RFID can be enrolled alone, with fingerprint or with password. Each RFID card comes with
a unique ID and the terminals will read from the numbers and match it with the card.
Enrollment of RFID is easy. Press Menu > User Manage > Enroll User/Admin > Reg RFID >
OK > Do you want to do new enrollment? > OK > Insert the user ID > OK > Wave the card
to the induction area and the machine will display the card number on the LCD along with
the User ID > OK > The terminal will display User ID-C meaning that the ID is enrolled with
card > OK(Save)
Verifi cation Using RFID Card Only
In case you would want your the terminal to read only RFID card, you can configure this
selection by selecting RF on Group VerType under Access Options.
Multi-verifi cation Methods Using RFID
The terminals allow multi-verification where a user is required to use two or more verifica-
tion methods before he could allow access to certain areas. Refer to Chapter 4: User, page
24 under Types of Verification Method for more information about different combinations
for the terminals and how to configure.
Basically, in order to select different verification methods, make sure that you have regis-
tered or enrolled that method in the terminal for the said User ID before any selection is
made.

Deleting RFID Card

RFID card can be used again and again but the information in the card must be deleted
first before inserting new information.
Press Menu > User Manage > Delete > Input the User ID and wave the card at the induction
area > The LCD will ask whether you want to delete the User ID-C > The terminal will ask
whether you want to delete User ID > And to delete user. Press OK to all.
Once the card has been emptied, it can be used again.

Changing Card ID

Press Menu > User Manage > Enroll User/Admin > Reg RFID > ESC > Change Card ID > Key
in Original ID > OK > Wave new card > OK (Save)
31