Management Of Duress Fingerprint; Help Key; Trigger Methods; Alarm Delay - FingerTec AC900 User Manual

MANAGEMENT OF DURESS FINGERPRINT

Press Menu > Options > Access Options > Duress Options > Duress FP >. You can perform
four tasks in this operation.
DURESS FP
New Enrollment
Define Duress FP
Undefine Duress FP
Undefine All Duress FP

HELP KEY

You can configure a Help Key in your terminal to function during duress situations. First,
you have to enable the Help Key by: Press Menu > Options > Access Options > Duress Op-
tions > Help Key > Y. Then, press and hold the down arrow for 3s followed by the duress
fingerprint verification, to trigger alarm.

TRIGGER METHODS

The terminals offer 3 types of alarm trigger method. Press Menu > Options > Access Op-
tions > Duress Options > Choose your method > Y. You can choose one method only.
ALARM TRIGGER METHOD WHAT DOES IT MEAN?
1:1 Trigger
1:N Trigger
Password Trigger
Do not using the same method and the same fingerprint during normal working days to avoid
NOTE
triggering the alarm system and disrupting working environment.

ALARM DELAY

Set the timer to set off the alarm after successful duress finger verification. The time range
is from 0 to 254s. The type of output for alarm is NO/NC. Press Menu > Options > Access
Options > Duress Options > Alarm Delay > Set your value > OK

Alarm Count

There is a limit to unsuccessful verification by a user. Predefine the value and if a user
exceeds the allowed times, the alarm could be triggered if your terminal is installed with
an alarm system. Press Menu > Options > Access Options > Alarm CNT > Define the value
> OK
Group Verifi cation Type
This function offers various verification type(s) for every group that can be set accord-
ing to time. Description of verification types available in FingerTec fingerprint terminal is
explained in Chapter 4: User. Press Menu > Options > Access Options > Group VerType >
Select the Group > OK > Select the time > Down arrow and select Verification Type. After
finished, press OK.
30
WHAT IS IT FOR
To perform new fingerprint enrollment for duress purpose
To define the already enrolled fingerprint for duress purpose
To undefined select enrolled duress fingerprint from the
terminal
To undefined all enrolled duress fingerprints from the terminal
Triggering alarm using 1:1 method
Triggering alarm using 1:N method
Triggering alarm using password method