Adding User Information; Deleting User; Access Level/Privilege - FingerTec R2 User Manual

FP & RF
PW & RF
FP/ PW/ RF
FP & PW & RF
PIN & FP & PW
FP & RF / PIN
Go to Chapter 8: Access Options to learn more about Grouping and Group Definition.
Adding User Information
User information can be added into FingerTec terminals through the Ingress software.
After the information is updated, sync Ingress with the terminal to display the informa-
tion.
Deleting User
Only an administrator can perform user deletion at the terminal. To delete certain user(s),
press Menu > User Manage > Delete > Input User ID > The terminal will tell you the veri-
fication method enrolled by the user ID > OK > Prompting you to Delete User > Press OK
> Confirmation is required > OK as Yes and Esc as No
Access Level/Privilege
The terminal offers various types of access level or privilege.
PRIVILEGE
Normal User
Enroller
Administrator
Supervisor
Fingerprint and RFID Card
Password and RFID Card
Fingerprint or Password or RFID. One method only
Fingerprint, password and RFID, all methods are required
User ID, fingerprint and password, all methods required
Fingerprint and RFID card or 1:1 fingerprint matching
USER ROLES
Only use the terminal to verify your identity. You cannot access
into the Menu and make changes on settings and system
You are allowed to access into the menu to enroll user only.
You are allowed to access into the menu to enroll users only and
edit simple settings and system excluding access options and
advanced options
You are allowed to access into the menu to enroll users and edit
settings and system
19
CONTENTS