Table of Contents
Advertisement
Figure2-23 Removing a PSR450-12D power supply
(1) Use a flat-head screwdriver to loosen the screws on the power cord connector
(2) Pull the power cord connector out
Connecting the power cord
WARNING!
Provide a circuit breaker for each power input. When you connect a power cord, make sure the
circuit breaker is switched off.
Connecting the power cord for a PSR450-12A/PSR450-12A1
power supply
1.
Insert the female connector of the power cord supplied with the power supply into the power
receptacle on the power supply.
2.
Use a releasable cable tie to secure the power cord to the handle of the power supply, as shown
in Figure2-24.
3.
Connect the other end of the power cord to an AC or DC power source.
Figure2-24 Connecting the power cord (PSR450-12A power supply)
(1) Releasable cable tie
(2) Fasten the cable tie to secure the power cord to the handle of the power supply
2-20
Advertisement
Table of Contents
