Part Names And Descriptions Of The Digital Operator - Omron 3G3JX User Manual

3-3 Part Names and Descriptions of the Digital Operator

3-3 Part Names and Descriptions of the
Digital Operator
3
RUN command LED indicator
8k8k8k8
3-9
Data display
Operation keys
Name
POWER LED indicator Lit when the power is supplied to the control circuit.
ALARM LED indicator Lit when an Inverter error occurs.
RUN (during RUN) LED
Lit when the Inverter is running.
indicator
Lit when the set value of each function is indicated on the data
PROGRAM LED
display.
indicator
Blinks during warning (when the set value is incorrect).
Displays relevant data, such as frequency reference, output current,
Data display
and set values.
Data display LED Lit according to the indication on the data display.
indicator Hz: Frequency A: Current
Volume LED indicator Lit when the frequency reference source is set to the FREQ adjuster.
Sets a frequency. Available only when the frequency reference
FREQ adjuster source is set to the FREQ adjuster. (Check that the Volume LED
indicator is lit.)
RUN command LED Lit when the RUN command is set to the Digital Operator.
indicator (The RUN key on the Digital Operator is available for operation.)
Activates the Inverter. Available only when operation via the Digital
RUN key Operator is selected.
(Check that the RUN command LED indicator is lit.)
Decelerates and stops the Inverter. Functions as a reset key if an
STOP/RESET key
Inverter error occurs.
Switches between: the monitor mode (d
Mode key mode (F
C
Description
), and the extended function mode (A
, H ).
FREQ adjuster
), the basic function
, b ,