Setting Function Codes - Omron 3G3JX User Manual

(Change the A002 setting.)
4. The code of the monitor mode is displayed (as "A002").
ak0k0k2
5. The extended function mode is displayed (as "A---").
ak-k-k-

Setting Function Codes

•You can enter codes for the monitor mode, basic function mode, and extended function mode
directly, as well as through the scrolling method.
•Below is an example where code d001 of the monitor mode is changed to extended function A029.
1. Display the code of the monitor mode (as "d001").
dk0k0k1
Press
(Continued to the next page)
3-4 Operation Procedure (Example: Factory Default)
•Change the RUN command selection to the
0k1
Press
•Press the Enter key to fix the changed setting
•The RUN command selection is changed to the
•You can now change to another extended
Press
(3 times)
•You can now move to another extended function
and simultaneously
terminal "01".
data.
terminal, and the RUN command LED indicator
will go off.
function code.
mode, the monitor mode, and the basic function
mode.
3
3-14