Signal During Run; Frequency Arrival Signal - Omron 3G3JX User Manual

4-2 Function Mode

Signal During RUN

4
This function outputs a signal while the Inverter is running.
Data
00
Available input terminals
Required settings
•Also outputs a signal during DC injection braking. Below is the time chart.

Frequency Arrival Signal

This function outputs a signal when the output frequency has reached the set value.
Data Symbol
01
02
Available input terminals
Required settings
•For elevating machines, use this signal for applying the brake.
4-63
Data Description
07 FBV: PID FB status output
08 NDc: Network error
09 LOG: Logic operation output
10 ODc: Do not use.
43 LOC: Light load detection signal
Symbol Function name
RUN Signal during RUN
Output frequency
FW
RUN output
Function name
Constant speed
FA1
arrival signal
Over set frequency
FA2
arrival signal
Reference item
PID FB status output
Network error
Logic operation result output
—
Light load detection signal
Status
ON The Inverter is in RUN mode.
OFF The Inverter is in STOP mode.
P1-PC, MA-MC (or MB-MC)
C021, C026
Status
The Inverter output frequency has reached the F001
ON
set value.
The Inverter output frequency has fallen below the
OFF
F001 set value.
The Inverter output frequency has exceeded the C042
ON
set value during acceleration.
The Inverter output frequency has fallen below the
OFF
C042 set value during acceleration.
P1-PC, MA-MC (or MB-MC)
C021, C026, C042, C043
Page
4-67
4-68
4-69
—
4-70
Description
Description